Audi Parking System Plus Front and Rear Park Distance Control Sensor System Retrofit For Audi A5 8T

Product Overview:

• Bundle in order to retrofit an original APS system on the front of the vehicle
• Distance indication by frequently acoustic sound
• Much better distance control
• Provides all round assistance for parking and manoeuvring

System Inclusions:

• Wiring
• Control Unit
• Sensors
• Buzzer

Features:

• System detects obstacles the driver cannot see and gives reliable warnings
• If the car approaches an obstacle while manoeuvring a tone signals the driver
• Up to 8 ultrasonic sensors are integrated into the bumpers to detect the distance to the obstacle and feed their measurements to the control unit
• As soon as the distance decreases to less than 120 centimetres in front of the vehicle or less than 160 centimetres behind it an intermittent signal sounds, if the signal falls to less than 30 centimetres the signal becomes a continuous tone
• The sensors are mounted on the bumpers in a barely visible flat configuration
• Tone emitters are built into the dash panel and the rear shelf
• At speeds above 15km/h the system is automatically deactivated. The system can also be switched off with a button – for instance in dense stop and go traffic

Notes:

• This system utilises original components

”Integrated Automotive Electronics Solutions”

Integration

When dealing with automotive electronics products, it is important to maintain the original characteristics and functionality of each vehicle, and that safety and aesthetic aspects are not compromised in any way. At Autofidelity, we call this integration. This solution is available for AUDI vehicles. For more integrated solutions, check out our AUDI solutions page.

Expertise

Autofidelity is renowned for employing the highest quality techniques and technicians, using the highest quality standards in the automotive electronics industry.

Wiring

Unfortunately, it is often the things that we don’t see that can make a difference. Inferior quality or poorly installed wiring can cause thousands of dollars in damage in extreme cases. In minor cases, wiring can even cause annoying rattles. Our systems are supplied with wiring harnesses which are wrapped in fabric insulation, conforming as closely as possible to the wiring standards set by the manufacturer and ensuring that there are no annoying rattles

Warranty

This product comes with a minimum of 12 month manufacturers warranty and if installed by Autofidelity Australia we offer a lifetime warranty on our installation.

Diagnostics Check

As a standard part of our installation process we carry out a pre-installation and post-installation diagnostic check on your vehicle. This allows us to ensure we do not incorrectly code or leave any components unplugged in your car. As an added bonus if there any existing faults in the vehicle we can identify and advise where it is. Having your vehicle properly diagnosed is a vital step when fixing faults to help reduce the chances of big unnecessary repair bills. If you are not having an installation done we can offer this service for a flat fee of $165 to perform the diagnostic check.

Information Assurance

For bookings and enquiries, please visit our contact page you can also check out our Facebook page, Twitter page, or visit our news page for more news and updates. Autofidelity is located at 26-28 Kilpa Road Moorabbin, Victoria Australia 3189, please click the link to access directions.