Skoda Yeti (5L) Skoda Park Pilot Front Parking Sensor System with OPS (Optical Display)

Skoda Park Pilot Front Parking Sensor System with Optical Display for Skoda Yeti 5L

As per factory specifications. Four sensor colour coded front parking assistance system with optical display

Product Overview:

  • Front retrofit of the Skoda Park Pilot system with OPS integration using original parts
  • Distance from obstacles is indicated acoustically, with sound emitted more frequently as the objects get closer to the vehicle, and also via visual representation of the vehicle on the navigation/radio display
  • Provides assistance for the front of the vehicle when parking and manoeuvring

System Inclusions:

  • Complete wiring harness
  • Control Unit
  • Sensors
  • Buzzer


  • Park Pilot system detects obstacles the driver cannot see and provides both audible and visual warnings
  • 4 ultrasonic sensors are integrated into the front bumper to detect their distance to the obstacle and feed their measurements up to the control unit
  • Sensors are flush-mounted into the bumpers providing the same aesthetic finish as the genuine factory fitted product
  • Sensors can be switched on or off using the park assistance button


  • This system utilises original components
  • Parking assistance systems must be used with care, and are not a replacement for common sense

”Integrated Automotive Electronics Solutions”


When dealing with automotive electronics products, it is important to maintain the original characteristics and functionality of each vehicle, and that safety and aesthetic aspects are not compromised in any way. At Autofidelity, we call this integration. This solution is available for Skoda vehicles. For more integrated solutions, check out our Skoda solutions page.


Autofidelity is renowned for employing the highest quality techniques and technicians, using the highest quality standards in the automotive electronics industry.

Most people can be forgiven for thinking that all parking sensor systems are equal, but are they?

It is important that every aspect of an installation of a Park Distance Control System meets the highest standards to ensure that the product operates for years to come, and doesn’t detract from the visual appeal of your Skoda, however there are many aspects that are often not considered. Here are some examples:

Colour Coding

The process of colour coding each sensor is not unlike the process used to paint your car. This is essential if the sensors are expected to retain the same standard of finish as your car for years to come.

Each sensor is prepared for painting using a special abrasive material, then cleaned and masked. The sensors are then inserted into a specialized painting jig ready for painting.

Paint colours are mixed according to manufacturer paint code and specifications using the Glasurit painting system to ensure a perfect colour match every time.

Each sensor is painted with 3 base coats and then 2 clear coats. The sensors are then baked in a professional, purpose built paint finishing oven.


Unfortunately, it is often the things that we don’t see that can make a difference. Inferior quality or poorly installed wiring can cause thousands of dollars in damage in extreme cases. In minor cases, wiring can even cause annoying rattles. Our systems are supplied with wiring harnesses which are wrapped in fabric insulation, conforming as closely as possible to the wiring standards set by the manufacturer and ensuring that there are no annoying rattles


This product comes with a minimum of 12 month manufacturers warranty and if installed by Autofidelity Australia we offer a lifetime warranty on our installation.

Diagnostics Check

As a standard part of our installation process we carry out a pre-installation and post-installation diagnostic check on your vehicle. This allows us to ensure we do not incorrectly code or leave any components unplugged in your car. As an added bonus if there any existing faults in the vehicle we can identify and advise where it is. Having your vehicle properly diagnosed is a vital step when fixing faults to help reduce the chances of big unnecessary repair bills. If you are not having an installation done we can offer this service for a flat fee of $165 to perform the diagnostic check.

Information Assurance

For bookings and enquiries, please visit our contact page you can also check out our Facebook page, Twitter page, or visit our news page for more news and updates. Autofidelity is located at 26-28 Kilpa Road Moorabbin, Victoria Australia 3189, please click the link to access directions.